Electrician - Lighting installation

€400
Task Assigned

Description

Looking for an electrician, preferably available today or tomorrow, to complete the following: 1. Installation of 3 pendant lights 2. Supply and installation of 1 single-gang antique brass dimmer switch 3. Supply and installation of 1 three-gang antique brass dimmer switch 4. Supply and installation of 1 three-gang antique brass dummy switch 5. Installation of kitchen under-cabinet LED strip with driver 6. Offsetting of 1 ceiling light point

Task Location: Stoneybatter, Dublin, County Dublin
Date Posted: 5 Sep 2026
Posted by:
Assigned to:
Task Assigned: Comments are now closed
Damien . 2 months ago

Apologies that was an alternative option, the below message. Whats actually needed. X amount meters of 24V COB LED Strip, 2700K, CRI 90+. [LedExpert.ie 24V COB 2700K Strip. X amount meters of Slim Aluminium Profile with Opal Diffuser covers and end caps. 1 or More 24V Constant Voltage TRIAC Dimmable LED Driver(s) to match the load. [LTECH CV 24V Triac Dimmable LED Driver] X amount LED-Compatible Trailing-Edge Wall Dimmer Module(s) (e.g., Varilight V-Pro or similar)." I was researching for Miguel and this is what I could find to match his request. That's all I could find. No point keeping it to myself. Hope it helps.

Damien . 2 months ago

Wouldn't let me share the link, look up Robus Pulse Connect 5M IP20 LED Strip KIT – CCT2 Tunable, make sure they come with a dimmable driver

Damien . 2 months ago

****** @Paul, the link above might help with your lighting search, best check they come with a dimmable driver

Paul M. 2 months ago

Yes part on Friday and the rest when I return.

Miguel C. 2 months ago

@Paul M. Thanks Paul, that makes it much clearer. Just to clarify how the payment will work, as the full job won’t be completed on Friday and the LED lighting will need to be sourced after you’ve assessed the kitchen, how would you prefer the payment to be handled? Would part be paid after Friday’s work and the remainder once you return and complete the work? Thanks!

Paul M. Made an offer 2 months ago
Paul M. 2 months ago

Yes

Miguel C. 2 months ago

@Paul M. Thanks Paul. Just to make sure I understand correctly, the amount you mentioned is for the labour to install the 3 pendant lights and fit the new switches/back box, including connecting and setting up the dimmer functions, with the cost of the switches and back box added separately once you’ve checked with the supplier. Is that correct?

Paul M. Made an offer 2 months ago
Miguel C. 2 months ago

@Paul M. For the kitchen lighting, I’m happy for us to assess it on Friday first. I definitely prefer a discreet surface-mounted solution, ideally concealed behind/above/inside the cabinets, rather than cutting into the finished walls or ceiling. Once we know the route and what’s required, I can source the 2700K, CRI 90+, dimmable LED strip and driver for the second visit. If you have links to the wholesalers you recommend, please send them over too. Thanks!

Miguel C. 2 months ago

@Paul M. That sounds good, thanks Paul. Friday afternoon works for me. Before we confirm, could you let me know what you would charge for Friday’s work — installation of the 3 ceiling lights, fitting the dimmer switches/back box, and assessing the best route for the under-cabinet lighting? Could you also let me know the cost of the antique brass switches/dimmers and back box before you purchase them?

Paul M. Made an offer 2 months ago
Paul M. 2 months ago

I can get the new light switches and the back box. Then I can examine your kitchen and identify the practical route for the under cabinet lights and you can source them.

Paul M. 2 months ago

Im sure there is no dedicated cable for under the wall cabinet lights, this is not standard in kitchens. Other option is to fit new cables. I don't know what is suitable for your kitchen but surface mount is more practical. Cutting the wall is not doable in your offer amount. There's several light wholesalers in Dublin and around Ireland and you can search online for them and the available lights. Or I can send you the links and you can search yourself.

Miguel C. 2 months ago

@Paul M. I’d also really prefer not to cut/chase any of the finished walls or ceiling. If there’s no dedicated cable for the under-cabinet lights, I’d like to see if there’s an existing suitable power source nearby that could be used instead, potentially via a fused spur if appropriate, with the cable and driver discreetly concealed behind/above/inside the kitchen cabinets. I’m happy to source the materials myself if you can tell me exactly what I need and the correct specifications. The 3 pendant lights are already here and ready for installation.

Miguel C. 2 months ago

@Paul M. Hi Paul, thanks. Friday works for me. For the switches, I’m looking for a single-gang antique brass dimmer and a 3-gang antique brass dimmer to replace the existing switches. I may also need a new back box for the 3-gang dimmer, depending on the existing setup. For the under-cabinet lighting, I’m honestly not sure which exact products/components to buy, so I’d appreciate your advice. What I’m looking for is a warm 2700K LED strip, CRI 90 or higher, dimmable, with a suitable dimmable driver.

Paul M. 2 months ago

I don't know which Led lights you want as there's lots of them.

Paul M. 2 months ago

Well what extra do you need? Switches only? I can't get the lights, best you get them. Yes I can come Friday.

Miguel C. 2 months ago

@Paul M. I'd be keen to have these done on Friday if its ok?

Miguel C. 2 months ago

@Paul M. Hi Paul. Thanks for the message. I've uploaded your requested pics of the pendants and switches. The 3 gang is in the living room and the single gang is in the bedroom. Does the €400 include materials and labour?

Paul M. Made an offer 2 months ago
Paul M. 2 months ago

Can you upload photos of the new ceiling lights?

Paul M. 2 months ago

Miguel the photos of the double switch that's beside the socket, Do you want this changed? Also where in the room are the other switches you want changed?

Miguel C. 2 months ago

@Damien . No worries Damien, completely understand. Thanks for taking the time to go through everything with me and for all the advice. Much appreciated, and all the best!

Damien . 2 months ago

Ya sorry now Miguel, the distance just wouldn't justify multiple trips to be honest. Positive side, anybody else reading our interactions will know what to expect so it takes some of the hassle out of it for you and them. Best of luck with the job. Best Regards Damien

Miguel C. 2 months ago

@Damien . Hi Damien, completely understand, and I appreciate you being upfront. Just to clarify, I wasn’t intending for it to be a separate job for only the 3 pendant lights. I was thinking you could install those on Friday and, while you’re here, assess the kitchen, switches and ceiling offset so we can establish exactly what’s required and then proceed with the rest of the work as one overall job. I’m happy to go ahead with the full scope with you once you’ve seen the setup and we’ve agreed on the materials and final cost. I just thought seeing everything in person might make it easier than trying to work it all out through photos and messages. But I completely understand if the distance still makes it impractical for you.

Damien . 2 months ago

Hi Miguel, to be 100% honest it wouldn't be worth my while for 3 lights and I couldn't justify charging to make it that way. If you want to get someone closer to you to do this part of the task initially and then call back to see out the rest out, it would be absolutely understandable. Im over an hour from your location, 1 way. Best Regards Damien

Miguel C. 2 months ago

@Damien . I've uploaded pics of the kitchen and switches. So let's say on Friday we'll work on the installations of the 3 pendants first, how much will you charge for labour?

Miguel C. 2 months ago

@Damien . Hi Damien, thanks, that all makes sense. For now, would it be okay if you come Friday morning to install the 3 pendant lights and, while you’re here, have a look at the existing electrical setup in the kitchen and the switches? I can walk you through what I’d like, and then we can work out exactly what’s needed for the remaining installations and what materials will be required. I’m also happy to source the materials myself if that makes things easier. If so, just give me a list of what I need and the correct specs based on what I’m looking for, particularly for the dimmers and the 2700K, CRI 90+ dimmable under-cabinet lighting and driver. I think that might be easier than me trying to figure out the electrical side of things myself ???? Friday morning works well for me.

Damien . 2 months ago

Hi Miguel, Ya, get what your saying. It would definitely be better to see for myself and you walk me through what your preferences. If, for now, you were to stand with your back to the kitchen and take a pic of the room infront of you, trying to get the existing switch in the pic, and then the wall to your right side too that would give me something to go off. If you could confirm that said wall attached to the kitchen is also slab and the kitchen wall itself above the counter. With respect to the 3gang replacement, a new double back box will be required to allow for the new dimmer installation. It's not a massive job. Sounds worse than it is. If you could do that it would be great. I could always take a look Friday morning and take it from there. The LED lights you've specifically requested are roughly €80 but I've yet to confirm if that includes a dimmable driver too. Just from researching what's available locally in electrical wholesalers and not stuff required to order online. Regards Damien

Miguel C. 2 months ago

@Damien . Hi Damien, for the under-cabinet lights I'd ideally like them operated/dimmed from a wall switch. I'm not sure if there is already a dedicated cable or supply for the under-cabinet lighting. For the 3-gang dimmer, yes, it's replacing the existing 3-gang standard switch on a single plate. The wall is plasterboard/Gyproc rather than concrete, but I'm not sure whether the existing back box will need to be changed. If it's easier, you're welcome to install the 3 pendant lights first and have a look at what's required for the remaining work while you're here. I'm not particularly knowledgeable about the electrical side of things, so it may be easier for you to assess the existing wiring and setup in person and then advise me on what's needed. Thanks, Miguel

Damien . 2 months ago

Hi Miguel, that's no problem. Question, for the LED dimmable under counter lights, where are you looking to operate them from? Also, for the 3 gang dimmer is it just replacing a 3 gang standard switch (single plate) ? Will there be a requirement to swap out the back box for the new switch and if so, is the wall concrete or slab?

Miguel C. 2 months ago

@Deepak A. Hi Deepak. I've put a pic of my kitchen in this task.

Deepak A. 2 months ago

Can u share the pics of existing switches where the dimmers are going

Miguel C. 2 months ago

@Damien . Hi Damien, apologies about mentioning the price. I wasn’t aware the bids were intended to remain private as I am new to this, but I’ll keep that in mind going forward. No problem at all. Have a look when you get a chance and let me know the final price once you’ve worked out what’s required for everything, including the kitchen lighting. Thanks, Miguel

Damien . 2 months ago

Hi Miguel, id appreciate if you didn't advertise prices on the public forum. They are hidden bids for a reason. Ill have to sit down properly later and source everything you've asked for and get a final and complete price. Depending on a power source available there may be a requirement to come off a kitchen socket into a fuse spur with a 5Amp fuse as protection. Ill get back to you after with a more accurate price. Regards Damien

Miguel C. 2 months ago

@Deepak A. Hi Deepak, would you also be able to source the dimmer switches and the under-cabinet LED materials for me? I’m not very familiar with the electrical side of things, so I’d prefer someone who knows what’s suitable to source the correct materials. For the dimmers, I’m looking for antique brass, LED-compatible trailing-edge dimmers — 1 × single-gang and 1 × three-gang. For the under-cabinet lighting, ideally 2700K warm white, CRI 90+, dimmable LED strip with an aluminium profile and opal diffuser. If you can source something suitable to those specs, just let me know the materials cost. Thanks!

Miguel C. 2 months ago

@Damien . Hi Damien, thanks. Friday works for me and the €250 labour is fine. Just a couple of things to confirm before we go ahead: 1. Are the dimmer switches you’ve sourced antique brass, LED-compatible trailing-edge dimmers for both the 1-gang and 3-gang? 2. For the under-cabinet lighting, I’m ideally looking for a 2700K warm white, CRI 90+ dimmable LED strip, with an aluminium profile and opal/frosted diffuser for a continuous light without visible LED dots, plus a compatible dimmable driver. Could you let me know if the set you’ve priced matches those specs? And just to confirm, is the approx. €160 for all of the above materials (both dimmers and the complete LED setup)? Thanks!

Deepak A. 2 months ago

The kitchen undercabinet has power connection already? Quote assumes it has already

Deepak A. Made an offer 2 months ago
Damien . Made an offer 2 months ago
Miguel C. 2 months ago

@Deepak A. Antique brass rotary dimmers, trailing-edge and suitable for low-wattage dimmable LEDs ideally Click Deco VPAB161 and VPAB163 or equivalent.

Miguel C. 2 months ago

@Deepak A. Hi Deepak. Yes, I already have all 3 pendant lights. They’re just replacing the existing lights at the current wired ceiling points, so no new wiring or new locations are required. I’ve revised the job slightly as well. I no longer need the dummy plate. I just need: • Installation of 3 pendant lights • Installation of LED strip lighting under the kitchen cabinets with driver • 1 × 1-gang dimmer and 1 × 3-gang dimmer, both in antique brass All 3 pendants already have dimmable LED bulbs, so the dimmer switches will need to be compatible with dimmable LEDs. For the dimmers, I’m looking for simple rotary switches in an antique brass finish. I can send you reference photos/links for the style I’m after.

Miguel C. 2 months ago

@Damien . Hi Damien, I’ve revised the list of jobs. I just need the following: Installation of 3 pendant lights – all have existing wired ceiling points. Installation of LED strip lighting under the kitchen cabinets, including the driver. Supply and installation of 2 antique brass dimmer switches – 1 × single-gang and 1 × three-gang. I won’t be offsetting the pendant light for now, as I still need to source a longer compatible linen/woven cable for it.

Deepak A. 2 months ago

Do you have the pendant lights? Are they just replacing the old ones or to be installed at new location with new wiring to be laid ? Can u share some pics of the dimmer switches and dummy plates you are looking from ...you can refer internet

Damien . 2 months ago

Correction on the dummy switch, I've honestly never come across one before but I know what it is now. Also, Friday would work for me also. Regards Damien

Damien . 2 months ago

Aslo, for the dummy switch, would a brass blank plate be a better option if your not after functionality but covering an unused switching point?

Damien . 2 months ago

Hi Miguel, are the 3 pendant lights already wired? I could pick up the materials during the week and do the job on Saturday if that suited you? Best Regards Damien

Miguel C. 2 months ago

@Damien . Hi Damian. Thanks for the reply. I can raise it to €440 including materials if you can supply them as I don't have any idea what are needed for these. Cash payment is also possible. I'm working Mon-Thurs next week so if you are free to do the job on Friday or weekends let me know. Thanks.

Damien . Made an offer 2 months ago